Toyota Corolla

1966–1983 · KE10, KE20, KE30/KE55 & KE70 · assembled at Thames from 1968

Parts suitable for the Corolla — order by the chassis code: KE10, KE20, KE25, KE30, KE35, KE55 or KE70.

Find parts suitable for the Corolla

Or shop by category

RelatedToyotaCoronaDatsun & Nissan

Not listed? Plenty of parts suit several marques and never get the model name in the title — ask us and we will check the books for you.

About Corolla

The first Corolla, the KE10 of November 1966, has a 1077cc overhead-valve four, later the 1166cc 3K, MacPherson struts at the front and leaf springs at the rear. Campbell Motor Industries at Thames began building Corollas in April 1968. The second generation of 1970 has the 3K in the KE20, a 1407cc engine in the TE20, the KE25 coupé, KE26 wagons and vans, and the twin-cam TE27 Levin; it too was built at Thames.

The third generation arrived in 1974 — KE30 and KE35, facelifted as the KE55 and built until 1981. The KE70 of 1979 brought the 1290cc 4K, and a coil-spring rear axle located by five links and a Panhard rod on every body except the wagon. Toyota New Zealand says the KE70 outsold the Escort, Civic and Chevette in its class here.

Corolla — where the parts change

KE10
November 1966 to April 1970. K 1077cc, later 3K 1166cc. Struts with a transverse leaf front; leaf-sprung rear.
E20
1970–74 (wagon and van to 1978). KE20 3K · TE20 1407cc · KE25 coupé · KE26 wagon/van · TE27 Levin.
E30 / E50
From 1974. KE30, KE35; facelifted KE55 to 1981.
KE70
1979–83 (wagon/van to 1987). 4K 1290cc and others. Coil-spring five-link rear, except the wagon.
Not genuine Toyota parts
All our parts are aftermarket. None are genuine Toyota parts unless the listing says so; each is suitable for the Toyota models listed.
Earth polarity
We cannot tell you for certain, and we will not guess. We could not find a reliable source on the earth polarity for older Corollas. Check the car before you order a coil, a regulator or a radio.

11 Products