Holden HT

1969–1970 · Holden’s own V8 · a bigger rear window · Monaro GTS 350

The HT has a bigger rear window than the HK — so the rear screen rubber is not the same.

Find HT parts by category

RelatedHolden HKHolden HGMonaro parts

Not listed? Plenty of parts suit several marques and never get the model name in the title — ask us and we will check the books for you.

About the Holden HT

The HT of May 1969 brought Holden’s own V8s — the 253 and 308 — while the Chevrolet 307 ran out, and a Chevrolet 350 for the Monaro GTS 350. The three-speed manual became fully synchromesh, and the Australian-built Trimatic automatic appeared in the last HTs. The body got a larger rear window, flatter rear flanks, new tail lights, a new instrument panel, a plastic grille in the same opening as the HK’s, and the squared-off boot lid of the HK Brougham.

Underneath, the front inner suspension bushes went from steel to rubber, the front springs got softer, sedans went to three-leaf rear springs, and the track widened by an inch. Brakes are as the HK: 10in drums with power front discs optional. The six-cylinder engines are unchanged from the HK. A Monaro GTS 350 won the 1969 Hardie-Ferodo 500.

Holden HT — specification & changes within the model

Engines
Red six 161, 186, 186S. Holden 253 and 308 V8; Chevrolet 350 in the Monaro GTS 350.
Gearboxes
Fully synchro three-speed. Trimatic in the last HTs. Powerglide.
Body
Larger rear window, flatter rear flanks, new tail lights and dash, plastic grille. Boot lid from the HK Brougham.
Suspension
Rubber front inner bushes (HK: steel). Three-leaf rear on sedans. Track 1in wider.
Brakes
10in drums; power front discs optional.
Earth polarity
We cannot tell you for certain, and we will not guess. We could not find more than one source on the earth polarity for the HT. Check the car before you order a coil, a regulator or a radio.

30 Products