Mazda Rotary — RX2, RX3, RX4 & RX7

1970–1985 · RX2, RX3, RX4 & RX7 · 10A, 12A & 13B

Rotary parts follow the engine — 10A, 12A or 13B — as well as the model.

Find rotary Mazda parts

RelatedMazdaMazda 323Japanese Cars

Not listed? Plenty of parts suit several marques and never get the model name in the title — ask us and we will check the books for you.

About the Mazda rotaries

Mazda’s rotary engines come in three sizes: the 10A of 982cc, the 12A of 1146cc and the 13B of 1308cc. The RX2 (Capella) has the 12A; the RX3 (Savanna) began with the 10A and got the 12A in the GT from September 1972, with struts at the front and leaf springs at the rear; the RX4 (Luce) began with the 12A and got the 13B from December 1973. The first RX7 ran from 1978 to 1985 with the 12A and a live rear axle located by four links and a Watt’s linkage.

The first rotary Mazdas arrived in New Zealand in October 1970, and the RX2 was assembled at Otahuhu from 1972 — most sources say it was the only rotary built here. By 1979, 1,897 RX2s had been sold. Rod Millen won the New Zealand Rally Championship in 1975, 1976 and 1977 in an RX3, and the RX7 arrived here in 1979.

Mazda rotaries — where the parts change

Engines
10A 982cc · 12A 1146cc · 13B 1308cc.
12A apex seals
Carbon until 1974, then cast iron.
RX3
10A, then 12A in the GT from September 1972. Struts front, leaf rear; front discs, rear drums.
RX4
12A, then 13B from December 1973.
RX7
SA22C 1978–80, FB 1981–85. 12A. Rear discs on some models.
Earth polarity
We cannot tell you for certain, and we will not guess. We could not find a reliable source on the earth polarity for the rotary Mazdas. Check the car before you order a coil, a regulator or a radio.
Sorry, this collection is empty.
Continue shopping