The SD1 arrived in June 1976 as the 3500, with the 2300 and 2600 following in November 1977 and the 2000, 2400 diesel and Vitesse with the 1982 facelift. The V8 runs twin SU HIF6s, injected on the Vitesse. The 2,350 and 2,597cc sixes are a Leyland design that is not the Triumph six, whatever you read, so do not expect Triumph engine parts to fit. Brakes are 10.15in solid front discs and 9in rear drums with a servo; the Vitesse has vented discs and four-pot calipers. MacPherson struts at the front, a live axle with torque tube, Watts linkage and self-levelling dampers at the rear, and Burman power rack-and-pinion steering.
The Series 2 of 1982 has flush headlamps, a deeper rear screen with wash-wipe, polyurethane bumpers and a new dashboard, and production moved from Solihull to Cowley. New Zealand built its own SD1s at Nelson from kits: Series 1 3500 automatics and 2600s from April 1979 to December 1981, then a short run of Series 2 2600S manuals and 3500SE automatics in 1983–84. No Vanden Plas was built here.
Rover SD1 — specification & changes within the model
- Versions
-
3500 1976 · 2300, 2600 1977 · V8-S 1979 · 2000, 2400 SD Turbo, Vitesse 1982 · Vanden Plas.
- Engines
- 3.5 V8, twin SU HIF6 (Vitesse injected). 2.3 and 2.6 Leyland six. 2.0 O-series four. VM 2.4 turbo diesel.
- Brakes
-
10.15in solid front discs, 9in rear drums, servo. Vitesse: vented front discs, four-pot calipers.
- Suspension & steering
- MacPherson front. Live axle, torque tube, Watts linkage, self-levelling dampers. Burman power rack.
- Series 2 — 1982
- Flush headlamps, deeper rear screen with wash-wipe, polyurethane bumpers, new dash.
- V8 differences
- Lower compression and a lip-type rear crank seal — not interchangeable with P5B and P6 rope-seal engines.
- Built at Nelson
-
Series 1: 504 × 3500 auto, 280 × 2600 auto, 272 × 2600 manual (1979–81). Series 2: 120 × 2600S manual, 192 × 3500SE auto (1983–84).
- Earth polarity
-
We cannot tell you for certain, and we will not guess. We could not find a source we trust that settles the earth polarity for the SD1. Check the car before you order a coil, a regulator or a radio.